Skip to main content
BUY NOW, PAY LATER
NO QUIBBLE RETURNS
365 DAY WARRANTY
FREE DELIVERY OVER £80

Made for high-roof Boxers (H2 and H3) with an awning rail 250 to 290cm from the ground. Pitch it, unhook the tunnel and drive off: the awning stays standing.

The Peugeot Boxer is a versatile van commonly used for high-top conversions, so getting the connection height right matters. We cover every variant. Standard roof or lower rail models (190cm to 250cm) fit our Campervan Awnings. H2 or H3 high-top models (250cm to 290cm) fit our Motorhome Awnings. Measure from the ground to your awning rail or fixing point to confirm.


Loopo Breeze XL or Cubo Tall Tunnel for a Peugeot Boxer?

Both fit a 250cm to 290cm rail, both have a sewn-in groundsheet and a 5,000mm hydrostatic head, and both come with throw-over straps for vans without a rail. The difference is how they go up and what you'll use them for.

Loopo Breeze XL inflatable awning attached to a high-roof van

Inflatable

Loopo Breeze® XL V2

10 minsto pitch, pump included
390 x 310cmfootprint
5 doorsand 4 windows
21kgpacked weight

Choose it if you want a room you can sleep in. Add the 2-berth inner bedroom and the back becomes a darkened bedroom with room for a double airbed. Take it out and the whole awning is living space again.

View the Loopo Breeze XL
Cubo Tall Tunnel poled awning attached to a tall van, seen from the front

Poled

Cubo Tall Tunnel

25 minsto pitch, spare pole included
300 x 300cmfootprint
3 doorsand 2 windows
12kgpacked weight

Choose it if you want a light, simple living room or a place for the kit to live, and you're happy pitching poles. There's no inner bedroom for this one.

View the Cubo Tall Tunnel

Check your roof height

Boxers come in different roof heights, and the height of your awning rail decides which awnings fit. Park on level ground and measure from the ground to your rail or fixing point.

Looking for a wind-out awning? Here's how a drive-away is different

Wind-out awning

Rolls out from a case fixed to your van's roof or side. It gives you shade and a dry patch by the door, and it goes wherever the van goes.

Drive-away awning

A freestanding room that joins your van with a tunnel. It has walls, a sewn-in groundsheet, doors and windows, and space to sleep if you add an inner bedroom. Unhook it and drive off, and it stays pitched.

Attaching it to your Boxer

Both tunnels have 4mm and 6mm beading, so they'll work with most rails. Here's what you need for each set-up.

1

You have an awning rail

Use a drive-away kit. It slides into your van's rail, the awning tunnel slides into the kit, and you slide it out again when you drive off. You'll find OLPRO drive-away kits in the range above.

2

No rail at all

Tunnel throw-over straps come in the bag with both awnings. They go over the roof and peg down on the far side, so you don't have to drill anything.

3

Heading out for the day

Detach the tunnel, zip it closed and drive off. The awning stands on its own, so your pitch is held and your gear stays dry. Expecting wind? Add a storm strap set.

Relaxing in a chair inside the Loopo Breeze XL awning

The van's for driving. The awning's for staying.

Boots off at the door, chairs out of the rain, and somewhere to put the bikes. We've been building awnings for the Great British Weather since 2011, and every canvas awning carries our Lifetime Warranty.

Read what campers say · How the warranty works

Same van, different badge

The Boxer shares its body with the Fiat Ducato and Citroën Relay, so the same awnings and the same measuring rule apply. Campervans built on the Boxer include the Auto-Sleeper Symbol and the Elddis Whirlwind GTV. Conversions vary, so measure yours before you order.

Peugeot Boxer awning questions

Will these awnings fit my Peugeot Boxer?

If your rail or fixing point is 250cm to 290cm from the ground, yes. That covers H2 and H3 high-roof Boxers and most Boxer-based motorhomes. Standard-roof (H1) Boxers usually measure 190cm to 250cm, and OLPRO campervan awnings are made for that height.

How do I measure my Boxer?

Park on level ground with the van loaded as you'd camp, then measure straight up from the ground to your awning rail or the point where the tunnel will attach. Suspension changes and roof fittings can move the number, so measure your own van rather than going by the brochure. The awning size calculator can help.

How do I attach an awning to a Boxer without a rail?

Use the tunnel throw-over straps that come with both awnings. They go over the roof and peg down on the other side. If you have a rail, a drive-away kit gives a neater seal.

Can I drive away and leave the awning pitched?

Yes. Both awnings stand on their own. Detach the tunnel, close it up and drive off. Your pitch stays reserved and your kit stays dry.

Can I sleep in it?

In the Loopo Breeze XL, yes. Add the 2-berth inner bedroom, which fits in about two minutes with ring and pin attachments and has room for a double airbed. The Cubo Tall Tunnel is a living and storage space with no inner.

Is a drive-away awning the same as a wind-out?

No. A wind-out rolls out from a case fixed to the van and gives you shade. A drive-away is a separate room with walls, a groundsheet and doors, and it stays put when you drive off.

How long do they take to pitch?

About 10 minutes for the inflatable Loopo Breeze XL with the included pump, and around 25 minutes for the poled Cubo Tall Tunnel. Give it a practice run at home before your first trip.