The C-Channel Awning Rail is the permanent way to give an awning something to attach to. Three 100cm strips of lightweight aluminium C-channel screw to the side of a campervan, motorhome, caravan or boat, or to a building, and take any standard 6mm awning beading strip.
Fit as many of the three strips as your awning needs: 18 self-tapping screws are included. The channel is 2.5cm wide, and the whole set weighs 1.1kg.
Once fitted, your awning slides in and out of the channel by its beading, or pairs with a drive-away kit if you want to detach the van and leave the awning standing.
Explore the C-Channel Awning Rail
3 x 100cm
aluminium strips
6mm
beading channel
18
screws included
1.1kg
set weight
A permanent attachment point. For any awning with standard 6mm beading.
Three 100cm aluminium strips. Fit one, two or all three to suit your awning.
Fixings included. 18 self-tapping screws in the pack.
Fits almost anything. Campervans, motorhomes, caravans, boats and buildings.
Light on the vehicle. Lightweight aluminium; the set weighs 1.1kg.
Drive-away ready. Pairs with a drive-away kit for leave-the-pitch trips.
- Type
- Awning Accessory
- Strips
- 3 x 100cm
- Channel width
- 2.5cm
- Takes
- 6mm awning beading
- Material
- Lightweight aluminium
- Weight
- 1.1kg (set)
- Fixings
- 18 self-tapping screws (included)
- Included
- 3 rail strips, 18 self-tapping screws
