The Retro Shade pairs a square charcoal canopy with three adjustable steel poles for a classic campervan look. Its 260cm by 260cm cover gives you a place to sit or eat beside the van, and the 6mm beading connects directly to a compatible awning rail.
The canopy uses 450D double-printed, yarn-dyed fabric with a 5,000mm hydrostatic head. Three guy lines and the adjustable poles support the pitch. Allow around 10 minutes to set it up, leaving enough space beside the van for the canopy and guy lines.
The Retro Shade weighs 6kg and packs down to 70cm by 15cm by 15cm. Poles, pegs, guy ropes, a repair kit and carry bag are included. A suitable gutter-rail connection uses a figure-of-eight channel, sold separately; check the connection on your van before choosing any extra fittings.
Explore the Retro Shade
260 × 260cm
square canopy
3 poles
adjustable steel
6mm
awning beading
6kg
weight
Square cover. A 260cm by 260cm canopy for outdoor seating beside your van.
Retro charcoal design. Double-printed, yarn-dyed fabric gives the canopy its retro look.
Three steel poles. Adjust the poles and secure the canopy with the supplied guy lines.
6mm beading. Connect directly to a compatible 6mm awning rail.
5,000mm hydrostatic head. Made from 450D fabric.
Carry bag and repair kit. The canopy packs down to 70cm by 15cm by 15cm.
Choose the Retro Shade if
- You want a square canopy with a retro look in charcoal.
- You have a compatible 6mm awning-rail connection.
- You prefer an adjustable steel-pole setup.
- You have room to carry a 6kg canopy with a packed length of 70cm.
Check before you buy
- Check your van height and awning-rail size before ordering. Measure from the ground to the rail as well as checking the vehicle height; the van model alone does not confirm the fit.
- Suitable vehicle height is 190cm to 250cm. This canopy has 6mm beading; it does not include dual 4mm and 6mm beading.
- For a compatible gutter-rail setup, the figure-of-eight channel is sold separately. This is an open canopy without a groundsheet.
Keep exploring
- fbt-product
- 3156
- fbt-product
- 2655
- fbt-product
- 3096
- vatrate
- 20
- Type
- Campervan Canopies
- Pitching Type
- Poled
- Weight
- 6kg
- Bedroom
- No
- Colour
- Charcoal
- Canopy dimensions
- 260 × 260cm
- Shape
- Square
- Suitable vehicle height
- 190–250cm; check attachment and rail height
- Packed dimensions
- 70 × 15 × 15cm
- Fabric
- 450D double-printed, yarn-dyed fabric
- Hydrostatic head
- 5,000mm
- Poles
- 3 adjustable steel poles
- Awning beading
- 6mm
- Groundsheet
- None
- Pitching time
- Under 10 minutes; allow longer on first setup
- Included equipment
- Pegs, guy ropes, poles, carry bag and repair kit
