The Pershore Breeze® is the quick, light way to add shelter beside a low campervan. It suits vans with an attachment height of 180cm to 200cm, weighs 11kg and pumps up on a single air beam in around 10 minutes. You get shade on a sunny pitch and a dry spot for the chairs when the clouds roll in, without the weight or setup of a full awning. This one comes in charcoal with orange detailing.
The side panels change with the weather. Zip them closed for shelter, roll them up to let the air through, or pitch them out on the two included steel canopy poles for extra covered space. When the rain sets in, zip in the door to close the front fully.
Two large windows keep it bright inside, and low vents keep the air moving. At 210cm high, with 350cm by 240cm of cover, there is standing room underneath.
The fabric is OLTECH® REPRO 150D, made from repurposed single-use plastic bottles, with a 5,000mm hydrostatic head. It attaches with dual 4mm and 6mm beading if your van has an awning rail, or with the included throw-over straps if it doesn't.
It all packs into a 60cm by 30cm by 30cm carry bag along with the manual pump, pegs, guy ropes, storm straps and repair kit. As a qualifying canvas product, it is covered by OLPRO's Product Lifetime Warranty against genuine manufacturing faults.
Explore the Pershore Breeze
180-200cm
attachment height
11kg
weight
10 mins
approx. to pump up
5,000mm
hydrostatic head
Made for low vans. An attachment height of 180cm to 200cm.
Single-beam pitch. One beam to pump up, in around 10 minutes.
Side panels that adapt. Zip closed, roll up, or pitch out on the steel canopy poles.
Zip-in door. Close the front fully when it rains.
Rail or no rail. Dual 4mm and 6mm beading, or the included throw-over straps.
OLTECH REPRO 150D. A 5,000mm hydrostatic head, made from repurposed plastic bottles.
Choose the Pershore Breeze if
- Your van is on the low side, with an attachment height of 180cm to 200cm.
- You want shelter beside the van without the weight or setup of a full awning.
- You like changing the setup with the weather: open canopy, rolled-up sides or a closed front.
- You want the charcoal and orange colourway.
Check before you buy
- Measure your van's attachment height on a level pitch. The Pershore Breeze suits 180cm to 200cm.
- Check whether your van has an awning rail. If it doesn't, the canopy attaches with the included throw-over straps.
- There is no bedroom inner and no sewn-in groundsheet.
- Allow around 10 minutes to pitch, and try it at home before your first trip.
Keep exploring
- Type
- Campervan Canopies
- Pitching Type
- Inflatable
- Weight
- 11kg
- Bedroom
- No
- Colour
- Charcoal & Orange
- Height
- 210cm
- Length
- 240cm
- Width
- 350cm
- Packed Dimensions
- 60cm x 30cm x 30cm
- Will Fit
- All vehicles between the height of: 180cm - 200cm
- Hydrostatic Head
- 5,000mm H/H
- Fabric
- OLTECH REPRO 150D
- Inflatable Beams
- Reinforced TPU Inflatable Beams
- Awning Beading
- 4mm & 6mm
- Sewn-in Groundsheet
- No
- Pitching Time
- Under 10 Minutes
- Number of Doors
- 1
- Number of Windows
- 2
- Bedroom Inner
- No
- Standing Room
- Yes
- What's Included?
- Manual Pump, Pegs, Guy Ropes, Storm Straps, Tunnel Throw Over Straps, Carry Bag, Repair Kit
Videos
-
OLPRO | Pershore Breeze® Campervan Canopy
Introducing our all-new campervan Canopy - the Pershore Breeze...
-
OLPRO | How to Pitch: The Pershore Breeze® Campervan Canopy #outdoorcomfort #camping #campingcomfort
Looking for the ultimate canopy to enhance your outdoor advent...
-
OLPRO | How to inflate an OLPRO Breeze® Air Beam
Learn from Gareth, our Operations Director at OLPRO, as he dem...
-
OLPRO | How to deflate an OLPRO Breeze® Beam
Watch Gareth, OLPRO's Operations Director, as he demonstrates ...
-
OLPRO | The Different Ways to Attach an Awning to a Van
Take a look at the different ways you can connect your Awning ...
-
OLPRO | How To Attach a Campervan Driveaway Awning
OLPRO shows you how to use a driveaway kit with a figure of 8 ...